Purchase Pump Impellers

Browse our extensive selection of pump impellers. Use the filters to find the correct impeller by material, manufacturer, or model for your pump. All parts are OEM-compatible.

Replacement Pump Impeller

PUMP IMPELLERS ARE ESSENTIAL

A pump impeller is a rotating component of a pump that moves fluid by applying velocity and pressure. The impeller consists of a central shaft with an attached series of blades or vanes. When the impeller rotates, it draws in fluid and propels it outwards through the pump housing, creating flow.

The size of the impeller blades and the speed at which the impeller rotates determines the flow rate and pressure of the pump. Pump impellers rotate at high speeds, often ranging from several thousand to tens of thousands of revolutions per minute (RPM). The exact speed at which a pump impeller rotates depends on various factors, including the size and design of the pump, the type of fluid being pumped, and the specific application for which the pump is being used. In general, Pump impellers are designed to rotate at high speeds to generate the necessary pressure and flow rate to move fluids through a system effectively.

Impellers for pumps can be made from a variety of materials, including metals and plastics, and are an essential component in many types of pumps, from simple household pumps to large industrial ones.

IF THERE IS DAMAGE, A PUMP IMPELLER REPLACEMENT IS POSSIBLE

A pump impeller can be replaced when it becomes damaged. In many cases, replacing the impeller will require disassembling the pump to access the impeller and remove it. Once the old impeller has been removed, a new one can be installed, and the pump reassembled. It is essential to use the correct size impeller that is compatible with the pump to ensure proper performance.

Platinum Performance Products carries a wide range of impellers for various replacement pump brands, including Composite, Goulds 3196, Myers, Aurora, Bell & Gossett, Taco, Paco, and Goulds G&L. Our replacement impellers are made from high-quality materials and designed to exceed the original manufacturer’s specifications. They are available in a variety of sizes and configurations to fit a wide range of industrial applications. 

Disclaimer: Platinum Performance Products provides parts that are compatible with or can replace different original equipment manufacturer (OEM) parts. The mention of any OEM names, trademarks, model numbers, or part numbers is purely for reference and does not indicate that we are an authorized distributor or representative of the listed companies and brands. We do not claim any association or affiliation with any of the OEM manufacturers mentioned on our website or in our product descriptions.

SHOP PUMP IMPELLERS

TOOLS NEEDED TO REPLACE AN IMPELLER IN A PUMP

A pump impeller can be replaced when it becomes damaged. In many cases, replacing the impeller will require disassembling the pump to access the impeller and remove it. Once the old impeller has been removed, a new one can be installed, and the pump reassembled. It is essential to use the correct size impeller that is compatible with the pump to ensure proper performance.

Before you begin, make sure that you have all the necessary tools and materials on hand. Having a clean workspace and a few rags or towels is also a good idea to clean up any spilled fluid or debris.

To replace a pump impeller, you will need to start by shutting off the power supply and draining any water inside the pump. Next, you will need to remove the pump casing by carefully removing any screws or bolts holding it in place. Once the casing is removed, you will see the impeller inside the pump. To remove the impeller, you will need to use a screwdriver to carefully remove the screws or bolts holding it in place. Once the impeller is loose, you can carefully lift it out of the pump. To install the new impeller, reverse these steps and tighten all screws and bolts securely.

The tools needed to replace a pump impeller will depend on the specific pump and the design of its impeller. In general, however, some standard tools that may be needed to replace a pump impeller include:

  • A wrench or socket set to remove bolts or other fasteners that hold the pump housing or impeller in place.
  • A screwdriver or other tool to remove any screws or other fasteners that secure the impeller.
  • A pair of pliers or a small pry bar to gently remove the impeller from the pump shaft.
  • A soft mallet or hammer to gently tap the new impeller onto the shaft, if necessary.

Replacing a pump impeller can help restore your pump’s performance and efficiency. You can replace your pump impeller quickly and easily using the right parts, tools and materials. Just be sure to work carefully and cautiously and follow the instructions for your specific pump to ensure that the replacement is successful.

Disclaimer: Platinum Performance Products provides parts that are compatible with or can replace different original equipment manufacturer (OEM) parts. The mention of any OEM names, trademarks, model numbers, or part numbers is purely for reference and does not indicate that we are an authorized distributor or representative of the listed companies and brands. We do not claim any association or affiliation with any of the OEM manufacturers mentioned on our website or in our product descriptions.

SHOP PUMP IMPELLER PARTS AT PLATINUM PERFORMANCE PRODUCTS

Contact Platinum Performance Products for your pump impeller replacement. For additional information and assistance for all your pump and seal applications, contact us at team@stg-h3ppumps-staging.kinsta.cloud.